Due to the increasingly advanced environmental sanitation equipment of today's cities, and the level of knowledge and skills of practitioners that cannot keep up with the pace of equipment update iterations, many practitioners do not understand the process of operating the relevant professional models, which in turn has the opposite effect of reduced efficiency. In order to strengthen the learning of employees, the operational flow of professional vehicles should be popularized as soon as possible. Then, for the self-loading garbage truck , let's briefly learn about the garbage dumping process. First, pull the garbage truck brake and hang the neutral position, and confirm that the engine is in working condition. The power take-off handle will be operated to the power take-off position and the clutch will be depressed. When the clutch is released, the gear pump operation will be started. It must be emphasized here that to ensure that the power take-off is fully engaged, the handle must be pushed down. Second, unlock the rear door, need to pull the rear door lock handle to the fully open position. After pulling the uninstall handle to the unloading position, the freight car will be turned over and the waste will be discharged from the carriage itself. 3. When the dumping of the garbage is completed, the carriage is turned over to the sub-frame, and at this time, the unloading handle must be pulled to the reset position. After the reset is completed, the rear door locking handle is then pulled to the locked position to lock the rear door securely. 4. When the work flow is completed, the user can step on the clutch and pull the power take-off handle to a separate position. Here still pay attention to ensure that the power take-off is completely out of engagement and the handle must be pulled to the disengagement position. 5. In addition, attention must be paid to the waste dumping process. Make sure there are no people who enter the dumping area during unloading. When dumping, check whether the locking device of the door lock is in the open state, and continue to operate step by step in the open state. After the reset, the rear door should also be locked. We firmly believe that on the basis of this study, we can make a simple expansion of the professional knowledge stocks of sanitation practitioners. At the same time, we will gradually increase their actual work ability in practical operations to avoid various types of losses and losses caused by mistakes. In the end, the best benefits of self-loading garbage trucks can be fully utilized. Electric Bike,Power Electric Bike,Battery Electric Bike,Lithium Battery Bike Ningbo Chenyuan Machinery Co., Ltd , https://www.cncysport.com
Dumping process of garbage truck