Camc Truck Xingma 6X4 Concrete Mixer Truck Mixer

Model NO.: AH5250P34C6M
Seats: ≤5
Horsepower: 351-450hp
Engine Capacity: >8L
Storage: Oil
Tire Certification: ECE, GCC, ISO
Tire Design: Tubeless or Radial
Condition: New
Trademark: CAMC, HUALING, XINGMA
Transport Package: Nude
Origin: China
HS Code: 870540000
Model NO.: AH5250P34C6M
Seats: ≤5
Horsepower: 351-450hp
Engine Capacity: >8L
Storage: Oil
Tire Certification: ECE, GCC, ISO
Tire Design: Tubeless or Radial
Condition: New
Trademark: CAMC, HUALING, XINGMA
Transport Package: Nude
Origin: China
HS Code: 870540000
CAMC Truck XINGMA 6×4 Concrete mixer Truck mixer
1.Product Description:
CAMC CONCRETE MIXER
Truck Model AH5250P34C6M
Truck Brand CAMC
Driving Form 6x4
Curb Weight 13200kg
Valid capacity 32000kg
Dimensions 8800/8980x2496x3860mm
Wheelbase 3600+1350mm/3900+1350mm/4100+1350mm
Engine Model CM6D8.345 30(345hp)/CM6D18.375 30(375hp)/CM6D18.420 30(420hp)
Type water-cooled, four strokes, 6 cylinders in line, turbocharged, directly injection,with engine brake
Maximum output 254/1900(kw/r/min) 276/1900 (Kw/r/min),309/1900(Kw/r/min)
Maximum torque 1660/1100-1400(N.m/r/min)1750/1100-1500 (N.m/r/min),1840/1100-1500(N.m/r/min)
Fuel type Diesel
Displacement 9.84L
Emission Standard Euro II,EURO III,EURO IV,EURO V,EURO VI
Transmission Model 8SDKy1981A
Type forward speed 8,reverse speed 1;16gear transmission and the drive ratio 15.50-1.00,thus it most
 reflects the advantage of CAMC truck,adopting obliquetoothed design and CBNwheel gear grinding 
technology,the gear machining accuracy can rach German standard DIN7,transmission efficiency is
 up to97%-98%;thus reduced the fuel consumption of truck.synchronizer is Hoerbiger from German,
short and comfortable during shift process;adopting imported shift power
 assisting air cylinder,it reduced driver's labour strength and more comfortable.
Front Axle Model HL7.5(7500kg)
Type Steering with double T-cross section beam
Rear Axle Model HL300A(16000kg*2)
Type cast steel axle,duplex drive axle with hub reduction (duplex drive axle with single reduction)
Ratio 4.769,5.263,5.921
Steering System Type Hydraulic steering with power assistance
Tyres 12.00R20/11.00R20/11R22.5/12R22.2/295/80R22.5(11pcs including one spare tyre)
Fuel Tank 280L,320L,380L
Cabin Model H6 cabin/classic cabin
Type one sleepers with air conditioner
drum Technical data drum volume(m3) 6m3,8m3,9m3,10m3,12m3
drum capacity(m3) 10.5m3,13.4m3,15.1m3,16.7m3,19m3
Charging speed(m3/min) 3.2
discharge speed(m3/min) 2.7
discharge residual rate 0.05%
Fuel Tank 280L,320L,380L
Water tanker capacity L 450L
Hydraulic system Rexroth PUMP and motor+ZF reduction  
2.Packing:    
 By Bulk    
 By Ro-Ro    
 By Frame    
 Container    
3. Main Products:    
Our products include full series Truck&Trailers,such as:    
*Dump Truck    
*Tractor Truck    
*Container chassis semi-trailer series    
*Cargo semi-trailer series    
*Tipper semi-trailer series    
*Low bed trailer series    
*Liquid tanker series    
*Power tank transport series    
*Concrete mixer series    
.etc,and spare parts    
4. Advantages:    
(1)Products Quality Certification SGS CCC ISO    
(2)Perfect after-sale service    
(3)More than 20 years' experience as a manufacturer    
(4)Customized products available with us    
(5)Export to more than 70 countries and regions    
5.FAQ    
Q1: What about your products quality ?       
   A: Quality is our culture! "Our factory has advanced production technology and management team!    
   We always attach great importance to quality controlling from the very beginning!    
Q 3: What others we can do ?    
   A: According to your order, we will provide the best price and quality trucks and trailers.    
   And we are well capable in offering overseas after-sales service. Besides, we also provide rational    
   packing and shipping program,let shipment save money and security.    
Q 4: How to guarantee customers get the goods smoothly after they pay ?    
   A: Don't worry, dear. We have been in this field for more than 15 years, we will send you production 
photos once in a while, and we will help you to book the latest ship.
   
Q 5: What's the delivery time ?    
   A: The delivery time is within 30 working days after receiving your advance payment.     
Q 6: Can you supply some quick-wear truck or semi trailer parts ?    
   A: Yes, we can supply truck and semi trailer parts as your request,such as oil filter, fuel filter, air filter,
 traction, traction pin, balance beam and semi-trailer
 plate spring, hanging accessories, turntable, all kinds of trailer brake pads,   brake pan, bearings etc.
   
 Q 7:  Do you have any used truck and semi trailer for sale ?    
   A: We have some trucks and trailers in stock for choice, from 2012-2017 year, the price are favorable. We'll    
   show you our stock if you need.    
Q 8:  What logistics ways we can work for shipment?    
   A: We can ship construction machinery by various transportation tools.    
   (1) For 70% of our shipment, we will go by sea, to all main continents such as South America,    
   Middle East, Africa, Oceania etc. Either by container or RoRo/Bulk shipment.    
   (2) For neighborhood countries of China, such as Russia, Mongolia, Kazakhstan, Uzbekistan , Vietnam, 
Laos  etc.,we can ship construction machinery by road or railway.
   
   (3) For light spare parts in urgent demand, we can ship it by international courier service, such as    
   DHL, TNT, UPS, or Fedex.    
6.Warranty:    
(1)One year quality guarantee or within 50000km, which comes the first.for engine 2 years quality guarantee 
or within 100000km.
   
(2)There are two ways we can ship the compensated spare parts:    
  Upon the urgent request from our clients,we will ship the compensated spare parts by international courier 
such as DHL,TNT,UPS or Fedex.
   
  ‚For the regular claim for the spare parts,we will ship the compensated spare parts together with the next 
shipment of new machines.The shipment expense is free.
   
7.Company Information:    
HUALING XINGMA AUTOMOBILE(GROUP)CO.,LTD was located in Economic and  Technical Development 
Zone,Ma'anshan city,Anhui province
   
The main products include dump truck,tractor head,concrete mixer truck,flatbed semi trailer,tipper semi 
trailer,low bed semi trailer,fuel tanker,cement
 tanker,crane truck,truck mounted crane, and so on. with Japan,India,Thailand,Singapore,Australia,Russian,
Southeast Asia,Africa and other countries and regions to establish a stable business development,the 
company basically has laid a solid foundation,
has a good business reputation and operating style.We will in good faith principle,wholeheartedly with the
 vast number of customers at home and abroad 
to work together.
   
     
Contact Person:Della(Ms)    
HUALING XINGMA AUTOMOBILE(GROUP)CO.,LTD,ANHUIDINGLING INTERNATIONAL CO.,LTD    
Adress:Economic and Technical Development Zone,Maanshan city,Anhui province,China    
Website:http:www.camc.cc    
Tel:+86 555 8323389    
Mobie+86 13955561205    
     
CAMC Truck XINGMA 6×4 Concrete mixer Truck mixer
1.Product Description:
CAMC CONCRETE MIXER
Truck Model AH5250P34C6M
Truck Brand CAMC
Driving Form 6x4
Curb Weight 13200kg
Valid capacity 32000kg
Dimensions 8800/8980x2496x3860mm
Wheelbase 3600+1350mm/3900+1350mm/4100+1350mm
Engine Model CM6D8.345 30(345hp)/CM6D18.375 30(375hp)/CM6D18.420 30(420hp)
Type water-cooled, four strokes, 6 cylinders in line, turbocharged, directly injection,with engine brake
Maximum output 254/1900(kw/r/min) 276/1900 (Kw/r/min),309/1900(Kw/r/min)
Maximum torque 1660/1100-1400(N.m/r/min)1750/1100-1500 (N.m/r/min),1840/1100-1500(N.m/r/min)
Fuel type Diesel
Displacement 9.84L
Emission Standard Euro II,EURO III,EURO IV,EURO V,EURO VI
Transmission Model 8SDKy1981A
Type forward speed 8,reverse speed 1;16gear transmission and the drive ratio 15.50-1.00,thus it most
 reflects the advantage of CAMC truck,adopting obliquetoothed design and CBNwheel gear grinding 
technology,the gear machining accuracy can rach German standard DIN7,transmission efficiency is
 up to97%-98%;thus reduced the fuel consumption of truck.synchronizer is Hoerbiger from German,
short and comfortable during shift process;adopting imported shift power
 assisting air cylinder,it reduced driver's labour strength and more comfortable.
Front Axle Model HL7.5(7500kg)
Type Steering with double T-cross section beam
We can supply big range of such stainless steel Casting Parts, including investment casting and Sand Casting

Sand Casting method (Sand Casting)

Using Sand as Mold material, according to the different components of Sand can be subdivided into wet Sand casting method of Green Sand Mold), surface Dry Sand casting method (Dry Sand Mold), and so on, but not all are available in the casting.

Advantage is lower cost, because the sand mold use reusable;

Lost wax Casting, Investment Casting

This method can be as the outer membrane casting method and the solid casting method.

To copy wax casting items required first, and then into the pool with ceramic and stay dry, make with wax replica is covered a layer of ceramic outer membrane, repeat steps until enough to support outer membrane casting process (about 1/4 inch to 1/8 inch), then the wax melting mould, and out of mold. Then mold need to high temperature for many times, enhance behind the hardness could be used in the casting.

This method has good accuracy, can be used as a high melting point metal, such as titanium casting.

B. Main particulars

MAIN PARTICULARS

Material for product

stainless steel(303, 304,316-)

Standard

ASTM, ASME, DIN, JIS, ISO, BS, API, EN

Certificate

ISO9001

Dimension

As per drawing, as large as we can

Processing

Step1:investment casting or sand casting

Step2:turning, milling, drilling, grinding, threading, CNC Machining, boring

Finishing surface

Machined surface with oil, blasting and painting, anodize, polishing, powder painting, electrophoretic coating-

Marking

as per clients` requirements

Inspection

material, construction, dimension, heat treatment, hardness, NDT

Quality

ISO9001, PPAP control production

Lead time

20-30 days for sample, consult with customer for mass production

Delivery

Express for sample, ocean shipping/air for mass production

Our Capabilities

CNC machining, CNC center machining, drilling, milling, turning, grinding, tapping, boring

Engineering & manufacturing services

R&D process, tooling and gauging design, product design

Integrated CAD/CAM system, test and measuring

Others

Recyclable, in line with environmental requirements and standards, and reliable


C. Construction

Construction by casting and machining


D Workmanship

The workmanship have good production practice. Care are taken to ensure High accuracy and smooth surfaces 

E. Certificates

- Material certificates

- Measuring reports

- Inspection protocol

- NDT reports

- Fixed certificate: ISO9001 certificate



Our service

Besides above the general specifications, we can also supply some specific machining parts as clients' requirements.


Package and shipping

Export cartons, pallets, wooden cases, Polybags

container package and container transportation

Stainless Steel Casting Parts

Stainless Steel Casting Parts,Oem Stainless Steel Casting Parts,Stainless Steel Sand Casting Parts,Stainless Steel Sand Casting Components

Shinvast Industry Ltd , https://www.shinvastindustry.com