1. Digital thermostat water bath first flashes after power display dfs, after the display date, to detect whether there are missing digital tube strokes. 2. Press the SET button for the first time, the indicator light SL is on, enter the temperature setting state, press the up key, adjust up 0.5°C, press down the key, down 0.1°C. 3. Press the set button for the second time, the first digit displays d, and enter the set advanced control temperature value, which can be adjusted at 0-5°C. (For example: if the temperature is set to 50 °C, if the temperature is 0.5 °C, in order to avoid the flushing temperature d will be adjusted to 0.5, so that heating to 49.5 °C to disconnect the heating; and if the setting temperature is 90 °C, if the temperature exceeds 1 degree, Adjust d to 1 and finally heat to 89 °C. 4. Press the set key for the third time, the first digit will display C or -, and enter the temperature deviation adjustment, which can be adjusted at -9.8 to 9.9°C. (For example: When the display temperature is 0.5 °C lower than the actual temperature, adjust C to 0.5 °C, so the actual and display the same; when the display temperature is 0.5 °C greater than the actual temperature, the C is adjusted to -0.5 °C, so the actual and display consistent) . 5. Press the set key for the fourth time to return to the measurement state. If the set value is the automatic control, after the set value is set to the end, if you do not press the set key to return to the measurement state, the temperature control table will be automatically after 5 seconds. Jump back and work. 6. Press and hold the setting key for 5-8 seconds to automatically reset the set temperature value to 00.0°C. Before setting the temperature for the first time, if the set temperature is not normal, it should be reset before use. 7. If it is a high-precision temperature control, 3-5 and 3-6 do not need to operate; In addition, press the setting button again, the upper row shows -d, indicating that the setting of the minimum heating power coefficient, the boot automatically is 3, can be in 1 -8 adjustments. Can be set to 7-8 in semi-closed state; fully closed state is 1-2 8. At the end of the work, press the set button for about 5 to 8 seconds. The temperature control system will automatically reset. When the set temperature is restored to 00.0°C, turn off the heating power. (If the work is completed, do not press the set button to reset the position and turn off the power directly. Then the temperature control system will record the original settings after the next restart). 9. If the water bath time is not used, drain the water from the studio tank and wipe it with a soft cloth and let it dry. Turbine High Speed Spiral hard Door
Hard turbine speed door: set energy-saving insulation and efficient wind environmental seal in a new metal industrial doors , opening speed of up to 1.5meters per second , For applications that require frequent rapid opening of the logistics channel , Insulation thickness 0.7mm aluminum door intermediate polyurethane foam , total thickness 40mm door wide 185mm per meter weight 1.63KG, Having good thermal insulation and light weight impact strength and other characteristics , wind rating of greater than 12 and theft , The door is suitable for indoor and outdoor fast-track logistics and production , The door type for enterprises save a lot of energy due to air flow generated loss than ordinary industrial sliding doors shutter doors save energy about eighty percent , Rapid opening and closing of the door so that enterprises in the rotational speed of the production and logistics of the door is greatly improved enterprise logistics and production must pass through the channel selection and its use is directly related to the efficiency of production and logistics , This product has high reliability , practicality and easy operation and quick fix for me , Drive control using a stable energy-effcient and accurate hard to guarantee fast and reliable operation of the door system the door to ensure trouble-free operation every year more than 250,000 times
High Speed Spiral Doors, fast opening garage doors, high speed garage doors, high speed metal doors, high speed aluminum doors SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfafd.com
Teach you how to maintain a digital thermostatic water bath