After the main components of the lyophilization machine are processed, they should be leak-checked separately, obvious leaks and leaks should be removed, and the initial inspection of the components should be completed, but this is often not enough. It also requires careful and careful attention during assembly and assembly. Leak detection, found that the problem was eliminated in a timely manner, leaving no hidden trouble. In the process of assembly and debugging of the whole machine, it is inevitable that some unimaginable problems will be exposed. This article summarizes from practice, the use of double vacuum leak detection method is an effective method, easy to get twice the result with half the effort. The increase in pressure at this time is:. Hefei, Hefei University of Technology Press, 2002.4045. Jin Sumin, Refrigeration Technology and Its Application. Beijing, Mechanical Industry Press, 1999.5, 260. Zhou Yongan, control method of freeze dryer. Vacuum and low temperature, 1998.9, 179180.
Ambient Vaporizer, Pressure Building Vaporizer, Water Bath Vaporizer, Pressure Regulating Manifolds ( PCM ), Cryogenic Piping & Fitting, Metal Hose, Cryogenic Valves, Cryogenic Pumps and more. Ambient vaporizer transfers cryogenic liquid gas into gaseous one by absorbing ambient air heat that is energy saving and environment friendly.
Nowadays, such airheated vaporizers have widely applied in gas station, distribution and plant back up system. We largely export atmospheric vaporizers and design them
upon container dimension to easily transport and save cost.
Ambient Vaporizer,Water Bath Vaporizer,Cryogenic Pump,Cryogenic Gas Equipment Wuxi Better Technology Co., Ltd , https://www.btheatexchanger.com
Study on Double Vacuum Leak Detection Technology of Lyophilizer Shelf
Study on Double Vacuum Leak Detection Technology of Lyophilizer Shelf
Core Tips: After the main components of the lyophilizer are processed, they should be leak-checked separately, with obvious leaks and leaks removed, and the initial inspection of the components completed, but often not enough. It is also necessary to repeat the assembly and assembly process. Careful and meticulous leak detection, found that problems were eliminated in a timely manner, leaving no hidden dangers. In the whole assembly and debugging