1. To reduce the failure of the salt spray test chamber, it is necessary to understand the causes of these faulty products; many electronic components may undergo degenerative failure as the working time limit is extended, and the elemental degradation failure of the salt spray test chamber covers a wide range. 2. The salt spray test box mainly has the following characteristics: Some parameters drift with the extension of work time or the change of the working environment, resulting in normal work from time to time, sometimes working abnormally. The main causes of these failures are: The above three conditions are the main reasons for the failure of the salt spray test chamber. It can be said that the quality of electronic components is directly related to the quality of the equipment. The Mica Panel Heater heats the room quickly, while achieving a higher room temperature at the same electrical rating. Our portable mica heaters include a heat reflector, greatly reducing heat loss that would normally be absorbed into the wall. This Mica inradiation heater was made with the highest quality components. Welcome to OEM, thank you Mica Space Heater,Micathermic Panel Heater,Delonghi Panel Heaters Wall Mounted,Delonghi Mica Heater Fenry manufacturing Co., Ltd , https://www.cnfenry.com
1. The result due to the load exceeding its internal bearing capacity and improper use and maintenance.
2, the failure of electronic components is generally the existence of quality and technical defects.
3, environmental factors, including temperature, humidity, voltage and light. 
How to Control the Reduction of Salt Spray Test Chamber Failure
How to Control the Reduction of Salt Spray Test Chamber Failure