Pump Name: IRG Metallurgy, Chemical , Textile Pipeline Centrifugal Water Pump Produtcs feature: 1.Smooth operation Pump Name: IRG Metallurgy, Chemical , Textile Pipeline Centrifugal Water Pump Produtcs feature: 1.Smooth operation The three-dimensional cup cover design increases the internal space, and the filtration efficiency of non-oily particulate matter can reach more than 95%. There are a variety of protection levels to choose from. Dongguan Jinzhuang Hydraulic Technology Co., Ltd. , https://www.jinzhuanghydraulic.comProduct Description
Products Introduction:
1.Suction pressure less than 1.0MPA, Or the maximum working pressure of the system less than 1.6Mp,Pump suction inlet pressure + pump head less than 1.6Mpa,The static pressure of the pump was 2.5MP.
Please indicate the working pressure of the system when ordering,When the pressure of pump system is greater than 1.6 MPA, it should be stated in advance when ordering.
The cast steel material should used for the flow parts and connections of the manufacturing pump.
2. Environmental temperature less than 40C. Â Relative humidity less than 95%.
3. Piping Pump volume of solid particles in the medium is not exceeding 0.1 percent of the unit volume, particle size less than 0.2mm. If have solid particles, Please indicate on the order, In order to use wear-resistant
mechanical seal.
Used Condition:
1.The maximum pressure of pump system is 1.6 Mpa.
2.Applicable media: the volume content of solid insoluble substance is not more than 0.1 percent, and the particle size is not greater than 0.2mm. (if the medium is equipped with fine particles with wear-resistant mechanical seal, please specify in the order timing).
3.Ambient temperature no more than 40C.The relative temperature is no more than 95%,The altitude is no more than 1000M.
Â
2.No leakage of medium
3.Low noise
4.Low failure rate
5.Convenient maintenance
Main Usage:
1. Transport of water and physical chemistry similar to other liquid used in clean water.It is suitable for industrial and urban water supply and drainage,High - rise building pressurized water delivery, Landscape irrigation,Fire pressurization,Remote delivery,Hvac refrigeration cycle, The bathroom and other cold and hot water circulating supercharging and equipment. Use temperature less than 120C.
2.Application :Energy, metallurgy, chemical industry, textile, paper and hotel, hotel, bathroom, boiler hot water supercharged circulation machinery city heating system.Use temperature less than 120C.
3. Piping Pump, which contains no solid particles, corrosive, viscosity similar to the liquid of water, Applicable to petroleum, chemical, metallurgy, electricity, paper, food pharmaceutical, synthetic fiber etc.Use temperature-20C--+120C.
4.Oil products such as gasoline, kerosene, diesel oil, etc., or flammable, explosive liquid, and the delivery medium temperature is -20C--+120C.
For More Details ,pls contact with us ~
Â
Product Description
Products Introduction:
1.Suction pressure less than 1.0MPA, Or the maximum working pressure of the system less than 1.6Mp,Pump suction inlet pressure + pump head less than 1.6Mpa,The static pressure of the pump was 2.5MP.
Please indicate the working pressure of the system when ordering,When the pressure of pump system is greater than 1.6 MPA, it should be stated in advance when ordering.
The cast steel material should used for the flow parts and connections of the manufacturing pump.
2. Environmental temperature less than 40C. Â Relative humidity less than 95%.
3. Piping Pump volume of solid particles in the medium is not exceeding 0.1 percent of the unit volume, particle size less than 0.2mm. If have solid particles, Please indicate on the order, In order to use wear-resistant
mechanical seal.
Used Condition:
1.The maximum pressure of pump system is 1.6 Mpa.
2.Applicable media: the volume content of solid insoluble substance is not more than 0.1 percent, and the particle size is not greater than 0.2mm. (if the medium is equipped with fine particles with wear-resistant mechanical seal, please specify in the order timing).
3.Ambient temperature no more than 40C.The relative temperature is no more than 95%,The altitude is no more than 1000M.
Â
2.No leakage of medium
3.Low noise
4.Low failure rate
5.Convenient maintenance
Main Usage:
1. Transport of water and physical chemistry similar to other liquid used in clean water.It is suitable for industrial and urban water supply and drainage,High - rise building pressurized water delivery, Landscape irrigation,Fire pressurization,Remote delivery,Hvac refrigeration cycle, The bathroom and other cold and hot water circulating supercharging and equipment. Use temperature less than 120C.
2.Application :Energy, metallurgy, chemical industry, textile, paper and hotel, hotel, bathroom, boiler hot water supercharged circulation machinery city heating system.Use temperature less than 120C.
3. Piping Pump, which contains no solid particles, corrosive, viscosity similar to the liquid of water, Applicable to petroleum, chemical, metallurgy, electricity, paper, food pharmaceutical, synthetic fiber etc.Use temperature-20C--+120C.
4.Oil products such as gasoline, kerosene, diesel oil, etc., or flammable, explosive liquid, and the delivery medium temperature is -20C--+120C.
For More Details ,pls contact with us ~
Â
It is suitable for respiratory protection of occupational medical personnel, effectively blocking airborne particles, droplets, blood, body fluids, secretions, etc.
Anti-Explosion Booster Pipe Centrifugal Pump High Quality
Power: Electric
Start Up: Electric Pump
Type: Blade Pump
Application: Submersible Pump, Sewage Pump, Chemical Pump
Industry: Sewage Pump
Media: Sewage Pumps
Performance: Wear Pump
Theory: Centrifugal Pump
Medium T: Less Than 80 Degree Centigrade
Color: Grey, Other Colors Customized
Capacity: 5-200L/S
Pressure Range: 0.2-1.35MPa
Speed: 2950, 1480
Environment T: Less Than 40c
Motor Safety Grade: IP44 IP54
Insulation Class: B.F Grade
Use in: Wastewater Treatment Systems
Other Details: Pls Check in Follow Data
Trademark: Tailide
Transport Package: Export Wooden Case
Origin: Shenyang, China
HS Code: 8413810090
Power: Electric
Start Up: Electric Pump
Type: Blade Pump
Application: Submersible Pump, Sewage Pump, Chemical Pump
Industry: Sewage Pump
Media: Sewage Pumps
Performance: Wear Pump
Theory: Centrifugal Pump
Medium T: Less Than 80 Degree Centigrade
Color: Grey, Other Colors Customized
Capacity: 5-200L/S
Pressure Range: 0.2-1.35MPa
Speed: 2950, 1480
Environment T: Less Than 40c
Motor Safety Grade: IP44 IP54
Insulation Class: B.F Grade
Use in: Wastewater Treatment Systems
Other Details: Pls Check in Follow Data
Trademark: Tailide
Transport Package: Export Wooden Case
Origin: Shenyang, China
HS Code: 8413810090