A Tomb of a Qing Dynasty Tomb Was Damaged by a Tomb

For the Zhang Yi-Cai couple's funerary tomb north of Mount Feng Shan Park

Recently, the Xinhua News Agency reported that “The Baiyun Ancient Tomb Was Stolen” reported that the ancient tombs in the Rhino Mountains in Baiyun Mountain were destroyed and caused public concern. Yesterday, the reporter once again received a volunteer report from the Guangzhou Folk Heritage Conservation Association that a tomb in the Qing Dynasty at Jinling Mountain in Jinshazhou was also damaged by a tomb.

At 9:00 a.m. yesterday morning, the reporter led by Mr. Yu, a member of the Guangzhou Folk Heritage Conservation Association, and the person in charge of the Nanyue Tomb Charm Association went to the Qianshan Mountain at Jinshazhou. The ancient tomb is located on the north side of the Fengfeng Mountain Park, and is a place where Zhang Yici and his wife were buried together. .

Mr. Yu said that one year ago, Zhang Yi and his wife were found to have been stolen. It is reported that some of the ancient tombs had been demolished or destroyed before the first phase of construction of the Fengfeng Mountain Park.

According to statistics, the tomb was a tomb of Zhang Yi and his wife, built in the Qing Dynasty (1830 AD). The reporter observed at the scene that the tomb belonged to the Chaos tomb, and there were two levels of mountaineers in front of the tomb. There was a columnar stolen hole in the middle of the tomb, and there were four mountain boundary pillars after the tomb. The total area of ​​the tomb is about 40 square meters.

According to Mr. Yu’s introduction, Zhang Yixian is an ancient Ishii man. Before his death he used to work as a clerk (who was awarded eight products), and the safety person Chua was the restroom of Zhang Yixian. The tomb was built in the Qing Dynasty light years (1830). There are two levels of mountain hands around the tomb, and there is a deep hole in front of the worship hall (which has been cleared and suspected to have been stolen).

Mr. Yu said that the tombstone was written by Liang Shuru, a painter of the Qing Dynasty. Ling Xusheng wrote with certain artistic value. “Liang Ruru is a Qing Dynasty painter and painter, and his works are housed in the Foshan Museum and the Guangdong Museum. Ling Xusheng, Qing Jinshi, once served as the leader of the Songshan Academy (headmaster). Unfortunately, the tomb was destroyed so severely.”

The reporter noticed that Zhang Yi and his wife did not hang a "cultural relic protection unit" or a "cultural relics registration and protection unit". In response, the relevant person in charge of the new office of the Baiyun District Wenguang New Area responded that the tomb was not listed for protection and may be processed by the relevant local authorities in accordance with the principle of “relationship management”.

The person in charge said that whether an ancient tomb can be listed as a cultural relic protection unit requires experts to conduct on-site investigations and certifications. If the tomb is destroyed, it needs to know whether it was destroyed before the “National Third Cultural Survey”. If it was destroyed before the “Sanpu,” it may have been damaged because it was not listed in the cultural relics protection unit.

Thermoplastic Road Line Marking Machine

Pavement Hot Melt Road Marking Machine

Latest aptitude program controller from Germany and human-friendly contrarily are adopted in the vibrating marking machine which it possible the prominent marking and prime mark painted at the same time and for just once .It is also equipped with step-less speed changing which makes the movement is carried out at will.It greatly promotes the implementing efficiency and makes the marking accurately fit the shape ,height and space between.It meets the requirement of various road condition and measures up to international norms.The road marks made by it can resist transformation ,abrasion and strikes.
Spots recommended
A.Express way:edge line of the express way ,diversion line,decelerating line near the toll booth and turns in the road.
B.Edge line of the city road,double amber line,cross road,sharp turn,entrance and exit of ramp,
decelerating line in front of the gates of schools,enterprises and institutions.
C.National,provincial and county roads:continuous declivity slope section,sharp turn preparation section,decelerating line before prevarication road,edge line and single amber line in all sections.
Features of fixing
Compulsory deceleration,reminding by shakes,glistening in rainy days and anti-slippery
1.Compulsory deceleration:remind the driver to slow down in dangerous section such as turn and slopes;
2.Reminding by shakes:Remind and warn the diver who drivers in fatigue or absent-mindedly;
3.Glistening in rainy days:Mark driving safe with clearer visual.
4.Anti-slippery:Magnify the friction with road and slow down the vehicle.
Major functions
When the driver is driving in fatigue or absent –mind-eely,the car shakes when it passes over the prominent lines giving out harsh noise.As a result,the driver comes back to sense promptly and readjusts the direction of the car thus preventing accidents.The prominent lines have better tree-dimensional reflection of light so that the driver can tell the direction and lane in rainy days.The mark lines guarantee the security of driver and provide compulsory deceleration and anti-slip-pery.


Main scope: Concrete Grinding machines, Floor Polishing Machines, Road Line Marking Machines, Truck Cranes, Road Rollers, Excavators, Concrete Leveling Machines, Power Trowels and other Construction machinery .


Jining oking tec co.,ltd, established in 2010, is a professional manufacturer engaged in the research, development, production, sale and service of Concrete Grinding machines, Floor Polishing Machines, Road Line Marking Machines, Truck Cranes, Road Rollers, Excavators, Concrete Leveling Machines, Power Trowels and other Construction machinery .

We are located in Jining city,Shandong province with convenient transportation access. Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction.

In recent years, we have introduced a number of advanced production equipment, and also have an excellent production team and a complete quality assurance system to ensure that each batch of goods is delivered to customers in a timely and high quality.

We also have an excellent management team, experienced technical staffs and professional sales team to solve all problems you encountered before and after sales. In addition, we have obtained I S O 9 0 0 1:2 0 1 5 certificates. Selling well in all cities and provinces around China, our products are also exported to clients in such countries and regions as United States, Europe,Australia, Southeast Asia,Russia,the Middle East,Africa. We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.

Thermoplastic Road Line Marking Machine


Thermoplastic Road Line Marking Machine,Thermoplastic Road Marking Machine,Thermoplastic Line Marking Machine,Thermoplastic Road Marking Machine For Sale

Shandong Nicosail Group Co., Ltd. , https://www.diggerexcavator.com